I confirmed this phenomenon with my own Delmhorst pinless moisture meter. Image #4 shows a comparative reading of 8 where the drywall has just an empty framing cavity behind it. Image #5 shows a reading of 35 at the corner. In its 2.5-inch by 3.5-inch sensor pad, the meter is including the metal cornerbead. The reading should not be interpreted to mean that the moisture level is higher in this location.
moisture meters" The Delmhorst manual indicates that % moisture content for gypsum wallboard up to approximately 50% is acceptable,0.5% to 1% is cautionary, and greater than 1% is unacceptable..." this sentence needs some clarification. "Up to approximately 0.5%"?
Mitsubishi Moisture Meter Ca 100 Manual
Have you tried a pinless moisture meter from Wagner Meters? I recently purchased one after doing some extensive research on what was the best pinless meter to buy. After seeing quite a few blog posts and forums with people talking about Wagner Meters I had to try one. I've had some cheap ones before and they never worked too well or pins would always break. I'm highly satisfied with my purchase.
Moisture meters are useful tools for professionals in many different industries. The ability to perform accurate moisture testing in different materials is a key part of ensuring high quality for paper producers, woodworkers, contractors, restoration specialists, and many other experts.
When a moisture meter is low on battery power, the meter might not power on, or it may not be able to get accurate readings. Warning signs of low batteries include faded/dim displays, inability to take a reading, or simply being unable to turn the meter on.
The pins on a pin-type meter and the scanning plate on a pinless meter are integral to the correct operation of the moisture meter. When pins and plates are damaged, moisture meter accuracy may be affected.
A lot of high-end moisture meters have a full array of special functions, such as the ability to make moisture content readings in different materials or to store and display previous reading results.
Here, The best fix here is to get to know your moisture meter by reading the manual or asking for help from the manufacturer. Some manufacturers even have online demos that explain how to use the advanced features of their meters.
There is always a chance that the meter might not be calibrated properly. This is why testing moisture meter calibration using a Moisture Content Standard (MCS) or built-in calibration check is important.
If moisture meter calibration is off, the best solution is usually to send the meter to the manufacturer for a simple repair. In many cases, minor problems such as this can be fixed quickly with a minimal turnaround time.
These are just a few of the most common reasons why a moisture meter might not work correctly for you. For more help and advice, check out some of our other resources or contact Delmhorst directly to learn more. 2ff7e9595c
Комментарии